- emulsionsale@yahoo.com
- +91 9955992261
SrConstruction produces various bitumen emulsion products that have a versatile range of applications, including the surfacing of new roads, upgrading and maintenance of existing roads. Bitumen emulsion is a mixture of bitumen, water, and emulsifying agents that are used as a binder for asphalt concrete and surface treatments. The products include RS-1, SS-1, MS, RS2, SS-2, COLD MIX. Some typical uses of bitumen emulsions include prime coats, tack coat, surface dressing, fog seal, soil stabilization, slurry sealing, microsurfacing, and cold mix. SrConstruction utilizes state-of-the-art equipment and quality control measures to ensure consistent and high-quality products.
Bitumen Emulsion RS-1 is a water-based emulsion of bitumen designed to quickly react with aggregate and convert from an emulsion state to bitumen. This particular grade, Rapid Setting-1, has a low viscosity and fast setting time, making it ideal for tack coat application. It meets the Indian standard of IS 8887 for rapid setting bitumen emulsions.
| Properties | Rapid Settings – 1 |
|---|---|
|
Residue on 600 micron IS Sieve, % Max
|
0.05
|
|
Viscosity @ 50 º C(Saybolt Viscometer), Sec
|
20-100
|
|
Storage Stability after 24 Hours, %
|
Less than 2
|
|
Binder residue by evaporation, % Min.
|
60
|
|
Coagulation at low temperature
|
Nil
|
Bitumen emulsion-RS 2 (RAPID SETTING) is a fast-setting bitumen emulsion used for road construction and repair. It is a cold-mix material that can be applied at ambient temperatures without heating. The emulsion is composed of bitumen, water, and an emulsifying agent that keeps the bitumen and water uniformly mixed. Bitumen emulsion-RS 2 has excellent adhesion to most surfaces, including concrete, and can be used to patch potholes, fill cracks, and surface-dress roads. It sets quickly, allowing for traffic to resume shortly after application.
| Properties | Rapid Settings – 2 |
|---|---|
Residue on 600 micron IS Sieve, % Max | 0.05 |
Viscosity @50 º C (Saybolt Viscometer), Sec | 100-300 |
Storage Stability after 24 Hours, % | Less than 1 |
Binder residue by evaporation, % Min. | 67 |
Coagulation at low temperature | Nil |
SS-1 is a slow-setting, low-viscosity oil-based bitumen emulsion with an extended setting time. It is specifically designed for use as a prime coat and manufactured in accordance with the IS 8887:2018 standard.
| Properties | Slow Setting-1 |
|---|---|
Residue on 600 micron IS Sieve, % Max | 0.05 |
Viscosity @ 25 º C(Saybolt Viscometer), Sec | 20-100 |
Water content, percentage by mass, Max. | 20 |
Residue at 360 º C, percentage, Min. | 50 |
Coagulation at low temperature | Nil |
Bitumen emulsion-SS 2 (SLOW SETTING) is a slow-setting bitumen emulsion used for various construction applications. It is a cold-mix material that can be applied at ambient temperatures without heating. The emulsion is composed of bitumen, water, and an emulsifying agent that keeps the bitumen and water uniformly mixed. Bitumen emulsion-SS 2 has excellent adhesion to most surfaces, including concrete, and can be used for tack coats, prime coats, fog seals, and dust suppression. It sets slowly, providing ample time for application and ensures good bonding with the surface.
| Residue on 600 micron IS Sieve, % Max | 0.05 |
|---|---|
Viscosity @ 25 º C(Saybolt Viscometer), Sec | 30-150 |
Storage Stability after 24 Hours, % | Less than 2 |
Binder residue by evaporation, % Min. | 60 |
Coagulation at low temperature | Nil |
Medium-Setting (MS) bitumen emulsion is specifically designed to be mixed with coarse aggregates for premix applications. Unlike other emulsions, MS does not immediately break upon contact with aggregates, providing a few minutes of workable time for fixing the aggregates. This type of emulsion is highly recommended for surface dressing work and is manufactured in compliance with IS 8887:2018 standards.
| Properties | Medium Setting-1 |
|---|---|
Residue on 600 micron IS Sieve, % Max | 0.05 |
Viscosity @ 50 º C(Saybolt Viscometer), Sec | 50-300 |
Storage Stability after 24 Hours, % | Less than 1 |
Binder residue by evaporation, % Min. | 65 |
Coagulation at low temperature | Nil |
Medium-Setting (MS) bitumen emulsion is specifically designed to be mixed with coarse aggregates for premix applications. Unlike other emulsions, MS does not immediately break upon contact with aggregates, providing a few minutes of workable time for fixing the aggregates. This type of emulsion is highly recommended for surface dressing work and is manufactured in compliance with IS 8887:2018 standards.
| Properties | Medium Setting-1 |
|---|---|
Residue on 600 micron IS Sieve, % Max | 0.05 |
Viscosity @ 50 º C(Saybolt Viscometer), Sec | 50-300 |
Storage Stability after 24 Hours, % | Less than 1 |
Binder residue by evaporation, % Min. | 65 |
Coagulation at low temperature | Nil |
Cold mix emulsion is a versatile and durable asphalt product that is ideal for road repairs, pothole filling, and patching. It is a ready-to-use mixture of bitumen emulsion, fine aggregates, and water that can be applied directly to damaged areas without heating.Our product is easy to apply and cures quickly, ensuring minimal disruption to traffic flow.
| IS SieveSize (mm) | Percentage (%) passingHigher Limits | Percentage (%) passingLower Limits |
|---|---|---|
9.5 | 100 | 100 |
4.75 | 100 | 50 |
2.36 | 40 | 10 |
1.18 | 10 | |
0.075 | 2 |
Partner with us to bring your vision to life with reliable, innovative solutions.Contact us today
to learn how our products can transform your projects.
SR Construction, our unwavering commitment to superior quality and unparalleled customer satisfaction has established us as a predominant emulsion manufacturer nationwide.
©2025 SR CONSTRUCTION All Rights Reserved.